Analysis Of The Role And Advantages Of Plasticizers in Polyurethane Applications
Jun 04, 2021
Polyurethane plastic has excellent elasticity and strength, and is very resistant to wear and shock, and is widely used in various industries. But in fact, these properties of polyurethane are closely related to polyester plasticizers. So, what role do plasticizers play in polyurethane?
Polyurethane itself can change its hardness by adjusting the composition of raw materials. Plasticizers are mainly used in polyurethane compounds to increase the plasticity of the compounds, improve the processing performance and the low-temperature properties of the vulcanized rubber, and reduce the hardness of the vulcanized rubber. strength. The amount of plasticizer should not be too large, otherwise it will reduce the wear resistance of the vulcanizate.
The advantages of plasticizers in polyurethane applications: 1. Reduce the viscosity of the material and facilitate mixing; 2. Stay in the product, increase the flexibility of the product, increase the elongation, reduce the hardness, and reduce the brittleness; 3. Reduce the cost; 4. In the reactive polyurethane system, the pot life can be extended, the operating temperature of the MOCA solvent can be reduced, and it can be used for room temperature curing, etc.; 5. An appropriate amount of plasticizers with good compatibility can improve the performance of the product, and improper use of plasticizers may damage Properties of polymer materials.
Dioctyl terephthalate (DOTP) has good electrical properties and cold resistance, low volatility, higher plasticizing efficiency than DOP, and lower volume resistance. It is used for products with high insulation, extraction resistance, heat resistance and flexibility. It is suitable as a plasticizer for polyurethane and polyvinyl chloride resin.






