Introduction of PVC and various additives
Oct 19, 2021
XiongXing Group 2021-10-11
The PVC plastic formula is mainly composed of PVC resin and additives. The additives are divided into heat stabilizers, lubricants, processing modifiers, impact modifiers, fillers, aging resistance agents, colorants, etc. according to their functions. Before designing PVC formula, we should first understand the performance of PVC resin and various additives.
Raw materials and additives
PVC resin
The resin for the production of PVC plastic profiles is polyvinyl chloride resin (PVC), which is a polymer polymerized from vinyl chloride monomers, and its output is second only to PE, ranking second.
PVC resin can be divided into loose type (XS) and compact type (Ⅺ) due to the different dispersants in polymerization. The loose particle size is 0.1-0.2mm, the surface is irregular, porous, and it is in the shape of a cotton ball, which can easily absorb plasticizer. The compact particle size is less than 0.1mm, the surface is regular, solid, and it is in the shape of a ping-pong ball. It is not easy to absorb the plasticizer. At present, more loose types are used.
PVC can be divided into ordinary grade (toxic PVC) and sanitary grade' (non-toxic PVC). The sanitary grade requires that the content of vinyl chloride (VC) is lower than 10x10-6, which can be used in food and medicine. The synthesis process is different, PVC can be divided into suspension PVC and emulsion PVC. According to Chinese national standards, suspension PVC is divided into PVC-SGl to PVC-SG8Jk resins. The smaller the number, the greater the degree of polymerization, the greater the molecular weight, and the higher the strength, but the more difficult it is to melt and flow, and the more difficult it is to process. . When making specific choices, when making soft products, PVC-SG1, PVC-SG2, and PVC-SG3 are generally used, and a large amount of plasticizer needs to be added. For example, polyvinyl chloride film uses SG-2 resin, and 50 to 80 parts of plasticizer is added. When processing hard products, generally no or very little plasticizer is added, so PVC-SG4, VC-SG5, PVC-SG6, PVC-SG7, PVC-SG8 are used. For example, SG-4 resin is used for PVC hard pipes, SG-5 resin is used for plastic door and window profiles, SG-6 resin is used for rigid transparent sheets, and SG-7 and SG-8 resins are used for rigid foaming profiles. The emulsion PVC paste is mainly used for artificial leather, wallpaper, floor leather and plastic products. The PVC resins manufactured by some PVC resin manufacturers are classified according to the degree of polymerization (the degree of polymerization is the number of unit chain links, and the degree of polymerization multiplied by the molecular weight of the chain link equals the molecular weight of the polymer).
PVC powder is a white powder with a density of 1.35-1.45g/cm³ and an apparent density of 0.4-0.5g/cm³. Depending on the plasticizer content, it can be soft or hard products. Generally, 0-5 parts of plasticizers are hard products, 5-25 parts are semi-hard products, and more than 25 parts are soft products.
PVC is a kind of non-crystalline and polar polymer with high softening temperature and melting temperature. Generally, pure PVC can be plasticized and processed at 160-210~C. Due to the polar bond between macromolecules, PVC can be plasticized. Shows hard and brittle performance. Moreover, the PVC molecule contains chlorine groups. When the temperature reaches 120~C, pure PVC begins to undergo HCl removal reaction, which will cause thermal degradation of PVC. Therefore, various additives must be added during processing to modify and impact the PVC so that it can be processed into useful products.
PVC resin is mainly used to produce all kinds of films (such as daily printing film, industrial packaging film, agricultural greenhouse film and heat shrinkable film, etc.), all kinds of boards, sheets (the sheets can be used for blister products), all kinds of pipes (Such as non-toxic water supply pipes, construction threading pipes, transparent hoses, etc.), various shaped materials (such as doors, windows, decorative panels), hollow blown bottles (for cosmetics and beverages), cables, various injection molded products and artificial leather , Floor leather, slush plastic toys, etc.
Stabilizer
Pure PVC resin is extremely sensitive to heat. When the heating temperature reaches 90Y: above, a slight thermal decomposition reaction will occur. When the temperature rises to 120C, the decomposition reaction will intensify. At 150C, 10 minutes, the PVC resin will turn from its original white color. It gradually becomes yellow-red-brown-black. The decomposition process of PVC resin is a series of chain reactions caused by the HCL removal reaction, which finally leads to the break of the macromolecular chain. The thermal stability mechanism to prevent thermal decomposition of PVC is achieved through the following aspects.
By capturing the HCl generated by the thermal decomposition of PVC to prevent the catalytic degradation of HCl, there are also metal soaps, organic tins, phosphites and epoxy resins. .Replace the active allyl chloride atom. Metal soaps, phosphites and organotins can act according to this mechanism. React with free radicals to terminate the reaction of free radicals. It has an additive effect with the conjugate double bond and inhibits the growth of the conjugate chain. Organotins and epoxies act according to this mechanism. . Decompose peroxides and reduce the number of free radicals. Organotin YJ-906 and phosphite work according to this mechanism. Passivation of metal ions that catalyze the removal of HCl. Organotin stabilizer YJ-906: suitable for PVC transparent products, with extremely high thermal stability and excellent initial colorability, pure color, minimal gas, and no precipitation.
Lubricant
The role of lubricants is to reduce the friction between materials and the surface of the materials and processing equipment, thereby reducing the flow resistance of the melt, reducing the viscosity of the melt, improving the fluidity of the melt, avoiding the adhesion of the melt and the equipment, and improving the product Surface finish, etc.
According to different molding methods, its lubrication focus is different:
calendering to prevent the melt from sticking to the roll;Injection molding, improve flow, improve demouldability;Extrusion molding, improve the flow, improve the separation of the die;
Pressing and lamination molding, which is conducive to the separation of the pressing plate and the product.
Classification of lubricants:
. According to the classification of lubricant ingredients, there are mainly saturated hydrocarbons and halogenated hydrocarbons, fatty acids, fatty acid esters, aliphatic ester amines, metal soaps, fatty alcohols and polyhydric alcohols.
. Classified according to the role of lubricants, it is divided into internal and external lubricants.
Its main distinction is based on its compatibility with the resin. The internal lubricant has a high affinity with the resin, and its role is to reduce the intermolecular force; the external lubricant has a small affinity with the resin, and its role is to reduce the friction between the resin and the metal surface.
The distinction between internal and external lubricants is only relative, and there is no strict division standard. In resins with different polarities, the role of internal and external lubricants may change. For example, stearic acid alcohol, stearic acid amide, butyl stearate and stearic acid monoglyceride have an internal lubrication effect on polar resins (such as PVC and PA); but for non-polar resins (such as PE , PP), it shows external lubrication. On the contrary, polymer paraffin wax has poor compatibility with polar resins. For example, it is used as an external lubricant in polar PVC, while it is used as an internal lubricant in non-polar resins such as PE and PP.
Under different processing temperatures, the role of internal and external lubricants will also change. For example, stearic acid and stearyl alcohol are used in the initial stage of PVC calendering. Due to the low processing temperature and poor compatibility with PVC, they mainly play the role of external lubrication; When the temperature rises, the compatibility with PVC will increase, and it will act as an internal lubricant.
According to the composition of lubricants, it can be divided into: saturated hydrocarbons, metal soaps, aliphatic amides, fatty acids, fatty acid esters and fatty alcohols.
1, saturated hydrocarbons
"Saturated hydrocarbons can be divided into non-polar hydrocarbons (such as polyethylene wax and polypropylene wax) and polar hydrocarbons (such as chlorinated paraffin, oxidized polyethylene, etc.) according to their polarity. Saturated hydrocarbons can be divided into molecular weight; liquid paraffin (C16-C21), solid paraffin (C26-C32) microcrystalline paraffin (C32-C70) and low molecular weight polyethylene (molecular weight 1000-10000), etc., mainly used for PVC Non-toxic external lubricant.
(1) Liquid paraffin: commonly known as white oil, it is a colorless and transparent liquid, which can be used as a transparent external lubricant for PVC. The dosage is about 0.5 parts, and the dosage will seriously affect the welding angle strength.
(2) Paraffin wax, also known as natural paraffin, white solid, can be used as an external lubricant for PVC, the dosage is 0.1-1.0 parts, too much dosage will affect the transparency.
(3) Microcrystalline paraffin, also known as high melting point paraffin, is white or light yellow solid in appearance. It is called microcrystalline paraffin because of its fine crystals. The lubricating effect and thermal stability are better than other paraffin waxes. The dosage in PVC is small, generally 0.1-0.3 parts.
(4) Low-molecular-weight polyethylene, also known as polyethylene wax, is white or light yellow solid powder with poor transparency. It can be used as an external lubricant for PVC extrusion and calendering. The dosage is generally less than 0.5 parts.
(5) Oxidized polyethylene wax is a product of partial oxidation of polyethylene wax, and its appearance is white powder. It has excellent internal and external lubrication, good transparency, low price, and the dosage is 0.2-1.0 parts.
(6) Chlorinated paraffin has good compatibility with PVC, poor transparency, and good effect when used with other lubricants. The dosage is less than 0.5 parts.
2, metal soaps
is not only an excellent heat stabilizer, but also a lubricant. It has both internal and external lubrication effects. Different varieties have slightly different emphasis. The lubricity is best with calcium stearate and lead stearate.
3, fatty acid amine
includes two categories: mono-fatty acid amides and bis-fatty amides. Mono-fatty acid amines mainly exhibit internal lubrication. The main varieties include ethyl bis-stearyl amide, N, N. ethylene bis-ricinoleic acid amide and so on.
4, fatty acids
Like XiongXing Stearic Acid G01, it is a widely used lubricant next to metal soaps. It can be used for PVC. When the amount is small, it has an internal lubrication effect; when the amount is large, it has an external lubrication effect. The amount of stearic acid added is less than 0.5 parts.
5. Fatty acid esters
(1) Butyl stearate, the appearance is colorless or light yellow oily liquid, in PVC, it is mainly internal lubrication and external lubrication, the dosage is 0.5-1.5 parts.
(2) Glyceryl monostearate, code-named GMS, is white waxy solid in appearance. It is an excellent internal lubricant for PVC and has little effect on transparency. The addition amount is less than 1.5 parts, and it can be used together with stearic acid.
(3) Ester wax and saponified wax mainly refer to the subsequent products made from montan wax as the main raw material through bleaching and other processes. Bleaching waxes include S wax and L wax, and saponified waxes include 0 wax and OP wax. Mainly used for HPVC, the dosage is 0.1-0.3 parts.
6, fatty alcohols
Stearyl Alcohol, the appearance is white fine bead, has internal lubricating effect, and has good transparency. The amount of 0.2-0.5 parts in PVC. It can also be used in PS. As PVC high temperature lubricant, the dosage is 0.2-0.5 parts.
Processing modifier
1. The principle of action of processing aids
Due to the poor ductility of PVC melt, it is easy to cause melt fracture; PVC melt relaxes slowly, which easily causes the surface of the product to be rough, dull and shark skin. Therefore, it is often necessary to add processing aids during PVC processing to improve the above-mentioned defects of its melt.
Processing aids are additives that can improve the processing performance of resins. There are three main ways of action: promoting resin melting, improving melt rheological properties and imparting lubricating functions.
(1) Promote resin melting: When the PVC resin is heated and melted under a certain shearing force, the processing modifier first melts and adheres to the surface of the PVC resin particles. Its compatibility with the resin and its The high molecular weight of PVC increases the viscosity and friction of PVC, which effectively transfers shear stress and heat to the entire PVC resin and accelerates the melting of PVC.
(2) Improve melt rheological properties: PVC melt has the disadvantages of poor strength, poor ductility and melt fracture, and processing modifiers can improve the above rheological properties of the melt. Its mechanism of action is to increase the viscoelasticity of PVC melt, thereby improving mold release expansion and increasing melt strength.
(3) Provide lubricity: the part of the processing modifier compatible with PVC is first melted to promote melting; while the part incompatible with PVC migrates out of the molten resin system, thereby improving mold release.
Our PVC processing modifier is an acrylic processing aid prepared by emulsion polymerization process, which can promote the melting of PVC at low temperature, enhance the cohesion and homogeneity of PVC melting, and reduce the processing temperature.
Endow products with excellent transparency, especially suitable for high-transparency products and high-end profiled materials.
Improve the rheological properties of PVC, promote the plasticization and melting of PVC resin, and improve the appearance quality of products. Especially suitable for the processing and molding of PVC highly transparent products.
2, commonly used processing modifier-ACR
ACR is a copolymer of methyl methacrylate, acrylate, styrene and other monomers. In addition to being used as a processing aid, it can also be used as an impact modifier. China's ACR can be divided into QH201, QH301 and QH401, QH402 several kinds, foreign brands are: K120N, K125, K175, P530, P501, P551, P700, PAl00, etc.
The important role of ACR processing modifier is to promote the plasticization of PVC, shorten the plasticization time, improve the uniformity of melt plasticization, and reduce the temperature of plasticization.
Generally use ACR201 or ACR401 in PVC plastic door and window profiles, and the dosage is 1.5-3 parts.
Impact modifier
An important part of the modification of polymer materials is to improve its impact resistance. PVC resin is a polar non-crystalline polymer with strong interaction between molecules, which is a hard and brittle material; impact resistance Lower. After the impact modifier is added, the elastomer particles of the impact modifier can reduce the total craze-induced stress, and use the particle's own deformation and shear band to prevent the expansion and growth of the craze, and absorb the impact in the transmitted material. Yes, so as to achieve the purpose of impact resistance. The particles of the modifier are very small, so as to increase the amount of modifier per unit weight or unit volume to increase the effective volume fraction, thereby enhancing the ability to disperse stress. At present, the most widely used organic impact modifiers are organic impact modifiers.
According to the molecular internal structure of organic impact modifiers, they can be divided into the following categories.
1. Predetermined elastomer (PDE) type impact modifier, which belongs to a polymer with a core-shell structure. The core is a soft elastomer, which gives the product high impact resistance. The shell is a polymer with a high glass transition temperature. The main function is to isolate the modifier particles from each other to form free-flowing component particles, promote their uniform dispersion in the polymer, and enhance the interaction and compatibility between the modifier and the polymer. Modifiers of this type of structure include: MBS and ACR.
According to the molecular internal structure of organic impact modifiers, they can be divided into the following categories.
1. Predetermined elastomer (PDE) type impact modifier, which belongs to a polymer with a core-shell structure. The core is a soft elastomer, which gives the product high impact resistance. The shell is a polymer with a high glass transition temperature. The main function is to isolate the modifier particles from each other to form free-flowing component particles, promote their uniform dispersion in the polymer, and enhance the interaction and compatibility between the modifier and the polymer. Modifiers of this type of structure include: MBS, ACR, MABS and MACR, etc., which are all excellent impact modifiers.
2. Non-predetermined elastomer type (NPDE) impact modifier, which belongs to the network polymer, and its modification mechanism is to modify the plastic by the solvation (plasticization) mechanism. Therefore, NPDE must form a network structure covering the resin, which is not very compatible with the resin. Modifiers of this type of structure include: CPE and EVA.
3. Transitional impact modifier whose structure is between two structures, such as ABS. The specific varieties used for PVC resin are:
(1) Chlorinated polyethylene (CPE) is a powdery product that uses HDPE to be suspended and chlorinated in the water phase. As the degree of chlorination increases, the originally crystalline HDPE gradually becomes an amorphous elastomer. The CPE used as a toughening agent generally contains 25-45% of C1. CPE has a wide range of sources and low price. In addition to its toughening effect, CPE also has cold resistance, weather resistance, flame resistance and chemical resistance. At present, CPE is the dominant impact modifier in China, especially in the production of PVC pipes and profiles, most factories use CPE. The amount added is generally 5-15 parts. CPE can be used in conjunction with other toughening agents, such as rubber, EVA, etc., with better effects, but rubber additives are not resistant to aging.
(2) ACR is a copolymer of monomers such as methyl methacrylate and acrylate. ACR is the best impact modifier developed in recent years. It can increase the impact strength of the material by several tens of times. ACR is an impact modifier with a core-shell structure. A shell composed of methyl methacrylate-ethyl acrylate polymer has a rubber elastomer cross-linked with butyl acrylate as the core and is distributed in the inner layer of the particle. It is especially suitable for the impact modification of PVC plastic products for outdoor use. The use of ACR as an impact modifier in PVC plastic door and window profiles has good processing performance, smooth surface, good aging resistance, and high welding angle strength compared with other modifiers. Features, but the price is about 1/3 higher than CPE. Commonly used brands abroad, such as K-355, generally use 6-10 servings. At present, there are fewer manufacturers of ACR impact modifiers in China, and fewer manufacturers use them.
(3) MBS is a copolymer of three monomers: methyl methacrylate, butadiene and styrene. The solubility parameter of MBS is between 94-95, which is close to the solubility parameter of PVC, so it has better compatibility with PVC. Its biggest feature is that it can be made into a transparent product after adding PVC. Generally, adding 4-6 parts to PVC can increase the impact strength of PVC by 6-15 times, but when the amount of MBS added is more than 30 parts, the impact strength of PVC will decrease instead. MBS itself has good impact properties, good transparency, light transmittance can reach more than 90%, and while improving impact properties, it has little effect on other properties of the resin, such as tensile strength and elongation at break.
Xiongxing Group adopts MBS products which is carefully developed by advanced synthetic resin technology. It is a ternary copolymerization of methyl methacrylate, butadiene and styrene, which improves the impact strength and processing performance of PVC products. The synthetic resin. Adding BS-156 to the polyvinyl chloride formulation can significantly improve the impact strength of the product without adversely affecting the inherent characteristics of polyvinyl chloride. It is widely used in PVC films, transparent sheets, pipes, pipe fittings, bottle pellets and other products.
(4) ABS is a terpolymer of styrene (40%-50%), butadiene (25%-30%), acrylonitrile (25%-30%), mainly used as engineering plastics, but also as PVC Impact modification has a good effect on low-temperature impact modification. When the amount of ABS added reaches 50 parts, the impact strength of PVC can be equivalent to that of pure ABS. The amount of ABS added is generally 5-20 parts. ABS has poor weather resistance and is not suitable for long-term outdoor use products. Generally, it is not used as an impact modifier for the production of plastic door and window profiles.
(5) EVA is a copolymer of ethylene and vinyl acetate. The introduction of vinyl acetate changes the crystallinity of polyethylene. The content of vinyl acetate is very poor, and the refractive index of EVA is different from that of PVC, making it difficult to obtain transparent products. Combine EVA with other impact-resistant resins. The amount of EVA added is 10 parts or less.
4. rubber impact modifier
is a toughening agent with excellent performance, the main varieties are: ethylene propylene rubber (EPR), ethylene propylene diene rubber (EPDM), nitrile rubber
(NBR) and styrene-butadiene rubber, natural rubber, butadiene rubber, chloroprene rubber, polyisobutylene, butadiene rubber, etc. Among them, EPR, EPDM, and NBR are the most commonly used. They are excellent in improving low-temperature impact resistance, but all Not resistant to aging, such impact modifiers are generally not used for plastic door and window profiles.
Other commonly used additives
1, light stabilizer
PVC products are mostly exposed to sunlight and other kinds of light. Adding a certain amount of light stabilizer according to the application environment of the product can prevent and delay its decomposition and aging, and prolong the service life of the product.
Light stabilizers can be roughly divided into four categories:
(1) Light shielding agent. For example, titanium white and carbon black can block ultraviolet rays from entering the interior of the profile to prevent the photodegradation of the polymer from proceeding. For example, the aging resistance of LDPE sheet with 2% carbon black is 20 times higher than that of LDPE sheet without carbon black. Titanium dioxide can greatly improve the aging resistance of the profiles. Rutile type titanium dioxide should be used for titanium dioxide, and the usage amount in PVC plastic door and window profiles is 3-6 parts.
(2) Ultraviolet absorber. It can strongly absorb 280-400nm ultraviolet light and convert it into visible light or heat. Commonly used products are UV-531, UV-327, UV-326, UV-p, etc. The dosage is generally 0.1-0.5%. But the price is higher.
(3) Quenching agent. The main purpose is to eliminate the energy of the excited polymer molecule and return it to the ground state. Specific varieties are nickel and cobalt complexes, including light stabilizer 2002 and light stabilizer 1084. Generally used in conjunction with other light stabilizers, the dosage is 0.1-0.5%.
(4) Radical scavenger. It is an efficient light stabilizer, which captures the free radicals decomposed by photodegradation and terminates the degradation reaction. Generally used in LDPE agricultural film. The main varieties are: light stabilizer GW-540, GW-544, CW-310, BW-10LD, light stabilizer 744, light stabilizer 622, light stabilizer 944, etc. The dosage is 0.02-0.5%.
Filler
The main purpose of using fillers is to occupy space to reduce costs. Of course, some fillers also give the material some special properties, such as flame retardant, electrical conductivity, thermal conductivity, rigidity, etc. The main indicators of the filler are: whiteness, particle size, particle shape and particle surface activity. The main varieties include:
(1) Carbonates are mainly heavy calcium carbonate, light calcium carbonate and activated calcium carbonate. Generally, active light calcium carbonate is used in PVC plastic profiles;
(2) Carbon black such as natural gas channel black, mixed gas channel black, high wear-resistant furnace black, thermal cracking carbon black, acetylene carbon black, etc. It is mainly used to reinforce rubber, and some varieties are also used as fillers, such as conductive and anti-static polymer materials.
(3) Sulfates include barium sulfate, calcium sulfate, lithopone, etc. They are mainly used as fillers and also have a coloring effect. Barium sulfate can reduce X-ray transmittance.
(4) Metal oxides such as aluminum oxide, iron oxide, manganese oxide, zinc oxide, antimony oxide, magnesium oxide, iron oxide, magnetic powder, etc., used as fillers and colorants.
(5) Metal powders such as aluminum, bronze, zinc, copper, lead and other powders for decoration and to improve thermal conductivity. In the production of plastic profiles, copper powder and aluminum powder are sometimes used to produce profiles for aluminum windows.
(6) Silicon-containing compound Kaolin is the most commonly used clay as a filler. Hard clay has a reinforcing effect. Talc is used as a filler.
(7) Fibers, such as glass fiber, boron fiber, carbon fiber, etc., are used as reinforcing agent.






